Deck Restoration

Deck Restoration

Deck restoration

Deck Restoration

Refinishing a deck is more than a fresh coat—it’s a full restoration that protects your investment. We follow a proven, step-by-step process to deliver lasting results. First, we inspect for rot, loose fasteners, and structural concerns. Then we deep clean to remove mildew, grime, and stain, followed by precision sanding to smooth the surface. We repair or replace damaged boards, reset or replace hardware, and tighten railings to improve stability and compliance. Next, we apply premium stains or sealers selected for Michigan’s freeze-thaw cycles, UV exposure, and lake-effect moisture. Finally, we detail edges, stairs, and high-traffic zones, and provide maintenance guidance to extend longevity.

1. Inspection & Assessment

We start with a thorough deck inspection and assessment. We check loose fasteners, cracked boards, rot, mold, mildew, and structural concerns—rails, stairs, and ledger. We complete minor repairs before refinishing; severely damaged boards are replaced to ensure a solid, lasting foundation.

2. Pressure Washing

We remove dirt, debris, mildew, algae, peeling stain, and oxidized fibers using pro cleaners and controlled pressure. We open the wood grain for superior stain bonding, then dry 24–48 hours for lasting results.

3. Sanding

After washing and drying, we sand to smooth raised grain, remove splinters, even weathered boards, and boost stain absorption. We hand-sand details, blend repairs, and remove all dust—ensuring a flawless, stain-ready surface.

4. Repairs

Before finishing, we tighten or replace loose screws and fasteners, set protruding nails below the surface, and address minor surface imperfections. West Michigan businesses trust us to deliver durable, refined results that protect your investment and elevate your space.

5. Staining & Sealing

Finally, we stain and seal the deck to protect it from UV damage, moisture, warping, cracking, and premature aging. Choose transparent, semi-transparent, or solid-color finishes. We apply with brushes, rollers, or sprayers—then back-brush for deep penetration, even coverage, and long-lasting, standout curb appeal.

Deck REstoration

Refinishing a deck is more than a fresh coat—it’s a full restoration that protects your investment. We follow a proven, step-by-step process to deliver lasting results. First, we inspect for rot, loose fasteners, and structural concerns. Then we deep clean to remove mildew, grime, and stain, followed by precision sanding to smooth the surface. We repair or replace damaged boards, reset or replace hardware, and tighten railings to improve stability and compliance. Next, we apply premium stains or sealers selected for Michigan’s freeze-thaw cycles, UV exposure, and lake-effect moisture. Finally, we detail edges, stairs, and high-traffic zones, and provide maintenance guidance to extend longevity.

1. Inspection & Assessment

We start with a thorough deck inspection and assessment. We check loose fasteners, cracked boards, rot, mold, mildew, and structural concerns—rails, stairs, and ledger. We complete minor repairs before refinishing; severely damaged boards are replaced to ensure a solid, lasting foundation.

2. Pressure Washing

We remove dirt, debris, mildew, algae, peeling stain, and oxidized fibers using pro cleaners and controlled pressure. We open the wood grain for superior stain bonding, then dry 24–48 hours for lasting results.

3. Sanding

After washing and drying, we sand to smooth raised grain, remove splinters, even weathered boards, and boost stain absorption. We hand-sand details, blend repairs, and remove all dust—ensuring a flawless, stain-ready surface.

4. Repairs

Before finishing, we tighten or replace loose screws and fasteners, set protruding nails below the surface, and address minor surface imperfections. West Michigan businesses trust us to deliver durable, refined results that protect your investment and elevate your space.

5. Staining & Sealing

Finally, we stain and seal the deck to protect it from UV damage, moisture, warping, cracking, and premature aging. Choose transparent, semi-transparent, or solid-color finishes. We apply with brushes, rollers, or sprayers—then back-brush for deep penetration, even coverage, and long-lasting, standout curb appeal.

Refinishing a deck is more than a fresh coat—it’s a full restoration that protects your investment. We follow a proven, step-by-step process to deliver lasting results. First, we inspect for rot, loose fasteners, and structural concerns. Then we deep clean to remove mildew, grime, and stain, followed by precision sanding to smooth the surface. We repair or replace damaged boards, reset or replace hardware, and tighten railings to improve stability and compliance. Next, we apply premium stains or sealers selected for Michigan’s freeze-thaw cycles, UV exposure, and lake-effect moisture. Finally, we detail edges, stairs, and high-traffic zones, and provide maintenance guidance to extend longevity.

1. Inspection & Assessment

We start with a thorough deck inspection and assessment. We check loose fasteners, cracked boards, rot, mold, mildew, and structural concerns—rails, stairs, and ledger. We complete minor repairs before refinishing; severely damaged boards are replaced to ensure a solid, lasting foundation.

2. Pressure Washing

We remove dirt, debris, mildew, algae, peeling stain, and oxidized fibers using pro cleaners and controlled pressure. We open the wood grain for superior stain bonding, then dry 24–48 hours for lasting results.

3. Sanding

After washing and drying, we sand to smooth raised grain, remove splinters, even weathered boards, and boost stain absorption. We hand-sand details, blend repairs, and remove all dust—ensuring a flawless, stain-ready surface.

4. Repairs

Before finishing, we tighten or replace loose screws and fasteners, set protruding nails below the surface, and address minor surface imperfections. West Michigan businesses trust us to deliver durable, refined results that protect your investment and elevate your space.

5. Staining & Sealing

Finally, we stain and seal the deck to protect it from UV damage, moisture, warping, cracking, and premature aging. Choose transparent, semi-transparent, or solid-color finishes. We apply with brushes, rollers, or sprayers—then back-brush for deep penetration, even coverage, and long-lasting, standout curb appeal.

deck pressure washing

We pressure wash decks to make them look and feel new again—and most “bad” decks just look bad. What many homeowners mistake for rot or failure is usually cosmetic. Discoloration typically comes from mold and mildew, algae, UV graying, dirt buildup, and old oxidized stain. These surface issues make a deck appear tired, but they’re not structural. With the right process, we revive the wood’s natural beauty without damaging it. Our approach is simple and effective: a calibrated pressure wash to lift organic growth and grime. The result? A 10-year-old deck that looks nearly new.

1. Pre-Treatment

We pre-treat every deck with a professional cleaner, letting it dwell 10–15 minutes while we keep the surface damp. This proactive step loosens dirt, algae, mold, and oxidation. Skipping pre-treatment forces excessive pressure, risking wood damage.

2. Low-Pressure Wash

We follow with a low-pressure wash, using 500–1200 PSI, a 25° or 40° tip, and keep the wand 8–12 inches from the surface. We move steadily, spraying with the grain. Our goal is simple and professional: rinse contaminants away—never blast them off.

3. Rinse & Brightening

We apply a professional wood brightener (oxalic or citric acid), let it dwell 5–10 minutes, then rinse thoroughly. This restores natural wood color, neutralizes the cleaner, and primes the surface for staining or sealing. This delivers vibrant, consistent results that last.

deck pressure washing

We pressure wash decks to make them look and feel new again—and most “bad” decks just look bad. What many homeowners mistake for rot or failure is usually cosmetic. Discoloration typically comes from mold and mildew, algae, UV graying, dirt buildup, and old oxidized stain. These surface issues make a deck appear tired, but they’re not structural. With the right process, we revive the wood’s natural beauty without damaging it. Our approach is simple and effective: a calibrated pressure wash to lift organic growth and grime. The result? A 10-year-old deck that looks nearly new.

1. Pre-Treatment

We pre-treat every deck with a professional cleaner, letting it dwell 10–15 minutes while we keep the surface damp. This proactive step loosens dirt, algae, mold, and oxidation. Skipping pre-treatment forces excessive pressure, risking wood damage.

2. Low-Pressure Wash

We follow with a low-pressure wash, using 500–1200 PSI, a 25° or 40° tip, and keep the wand 8–12 inches from the surface. We move steadily, spraying with the grain. Our goal is simple and professional: rinse contaminants away—never blast them off.

3. Rinse & Brightening

We apply a professional wood brightener (oxalic or citric acid), let it dwell 5–10 minutes, then rinse thoroughly. This restores natural wood color, neutralizes the cleaner, and primes the surface for staining or sealing. This delivers vibrant, consistent results that last.

We pressure wash decks to make them look and feel new again—and most “bad” decks just look bad. What many homeowners mistake for rot or failure is usually cosmetic. Discoloration typically comes from mold and mildew, algae, UV graying, dirt buildup, and old oxidized stain. These surface issues make a deck appear tired, but they’re not structural. With the right process, we revive the wood’s natural beauty without damaging it. Our approach is simple and effective: a calibrated pressure wash to lift organic growth and grime. The result? A 10-year-old deck that looks nearly new.

1. Pre-Treatment

We pre-treat every deck with a professional cleaner, letting it dwell 10–15 minutes while we keep the surface damp. This proactive step loosens dirt, algae, mold, and oxidation. Skipping pre-treatment forces excessive pressure, risking wood damage.

2. Low-Pressure Wash

We follow with a low-pressure wash, using 500–1200 PSI, a 25° or 40° tip, and keep the wand 8–12 inches from the surface. We move steadily, spraying with the grain. Our goal is simple and professional: rinse contaminants away—never blast them off.

3. Rinse & Brightening

We apply a professional wood brightener (oxalic or citric acid), let it dwell 5–10 minutes, then rinse thoroughly. This restores natural wood color, neutralizes the cleaner, and primes the surface for staining or sealing. This delivers vibrant, consistent results that last.